cmake: Add support for -zkp modules

Co-authored-by: lightyear15 <g.minist8@gmail.com>

CMakeLists.txt

@@ -61,8 +61,70 @@ option(SECP256K1_ENABLE_MODULE_EXTRAKEYS "Enable extrakeys module." ON)
 option(SECP256K1_ENABLE_MODULE_SCHNORRSIG "Enable schnorrsig module." ON)
 option(SECP256K1_ENABLE_MODULE_ELLSWIFT "Enable ElligatorSwift module." ON)
 
+option(SECP256K1_ENABLE_MODULE_GENERATOR "Enable NUMS generator module." ON)
+option(SECP256K1_ENABLE_MODULE_RANGEPROOF "Enable Range proof module." ON)
+option(SECP256K1_ENABLE_MODULE_SURJECTIONPROOF "Enable Surjection proof module." ON)
+option(SECP256K1_ENABLE_MODULE_WHITELIST "Enable key whitelist module." ON)
+option(SECP256K1_ENABLE_MODULE_MUSIG "Enable MuSig module." ON)
+option(SECP256K1_ENABLE_MODULE_ECDSA_ADAPTOR "Enable ecdsa adaptor signatures module." ON)
+option(SECP256K1_ENABLE_MODULE_ECDSA_S2C "Enable ECDSA sign-to-contract module." ON)
+option(SECP256K1_ENABLE_MODULE_BPPP "Enable Bulletproofs++ module." ON)
+
 # Processing must be done in a topological sorting of the dependency graph
 # (dependent module first).
+if(SECP256K1_ENABLE_MODULE_BPPP)
+  if(DEFINED SECP256K1_ENABLE_MODULE_GENERATOR AND NOT SECP256K1_ENABLE_MODULE_GENERATOR)
+    message(FATAL_ERROR "Module dependency error: You have disabled the generator module explicitly, but it is required by the bppp module.")
+  endif()
+  set(SECP256K1_ENABLE_MODULE_GENERATOR ON)
+  add_compile_definitions(ENABLE_MODULE_BPPP=1)
+endif()
+
+if(SECP256K1_ENABLE_MODULE_ECDSA_S2C)
+  add_compile_definitions(ENABLE_MODULE_ECDSA_S2C=1)
+endif()
+
+if(SECP256K1_ENABLE_MODULE_ECDSA_ADAPTOR)
+  add_compile_definitions(ENABLE_MODULE_ECDSA_ADAPTOR=1)
+endif()
+
+if(SECP256K1_ENABLE_MODULE_MUSIG)
+  if(DEFINED SECP256K1_ENABLE_MODULE_SCHNORRSIG AND NOT SECP256K1_ENABLE_MODULE_SCHNORRSIG)
+    message(FATAL_ERROR "Module dependency error: You have disabled the schnorrsig module explicitly, but it is required by the musig module.")
+  endif()
+  set(SECP256K1_ENABLE_MODULE_SCHNORRSIG ON)
+  add_compile_definitions(ENABLE_MODULE_MUSIG=1)
+endif()
+
+if(SECP256K1_ENABLE_MODULE_WHITELIST)
+  if(DEFINED SECP256K1_ENABLE_MODULE_RANGEPROOF AND NOT SECP256K1_ENABLE_MODULE_RANGEPROOF)
+    message(FATAL_ERROR "Module dependency error: You have disabled the rangeproof module explicitly, but it is required by the whitelist module.")
+  endif()
+  set(SECP256K1_ENABLE_MODULE_RANGEPROOF ON)
+  add_compile_definitions(ENABLE_MODULE_WHITELIST=1)
+endif()
+
+if(SECP256K1_ENABLE_MODULE_SURJECTIONPROOF)
+  if(DEFINED SECP256K1_ENABLE_MODULE_RANGEPROOF AND NOT SECP256K1_ENABLE_MODULE_RANGEPROOF)
+    message(FATAL_ERROR "Module dependency error: You have disabled the rangeproof module explicitly, but it is required by the surjectionproof module.")
+  endif()
+  set(SECP256K1_ENABLE_MODULE_RANGEPROOF ON)
+  add_compile_definitions(ENABLE_MODULE_SURJECTIONPROOF=1)
+endif()
+
+if(SECP256K1_ENABLE_MODULE_RANGEPROOF)
+  if(DEFINED SECP256K1_ENABLE_MODULE_GENERATOR AND NOT SECP256K1_ENABLE_MODULE_GENERATOR)
+    message(FATAL_ERROR "Module dependency error: You have disabled the generator module explicitly, but it is required by the rangeproof module.")
+  endif()
+  set(SECP256K1_ENABLE_MODULE_GENERATOR ON)
+  add_compile_definitions(ENABLE_MODULE_RANGEPROOF=1)
+endif()
+
+if(SECP256K1_ENABLE_MODULE_GENERATOR)
+  add_compile_definitions(ENABLE_MODULE_GENERATOR=1)
+endif()
+
+
 if(SECP256K1_ENABLE_MODULE_ELLSWIFT)
   add_compile_definitions(ENABLE_MODULE_ELLSWIFT=1)
 endif()
@@ -292,6 +354,14 @@ message("  ECDSA pubkey recovery ............... ${SECP256K1_ENABLE_MODULE_RECOV
 message("  extrakeys ........................... ${SECP256K1_ENABLE_MODULE_EXTRAKEYS}")
 message("  schnorrsig .......................... ${SECP256K1_ENABLE_MODULE_SCHNORRSIG}")
 message("  ElligatorSwift ...................... ${SECP256K1_ENABLE_MODULE_ELLSWIFT}")
+message("  generator ........................... ${SECP256K1_ENABLE_MODULE_GENERATOR}")
+message("  rangeproof .......................... ${SECP256K1_ENABLE_MODULE_RANGEPROOF}")
+message("  surjectionproof ..................... ${SECP256K1_ENABLE_MODULE_SURJECTIONPROOF}")
+message("  whitelist ........................... ${SECP256K1_ENABLE_MODULE_WHITELIST}")
+message("  musig ............................... ${SECP256K1_ENABLE_MODULE_MUSIG}")
+message("  ecdsa-s2c ........................... ${SECP256K1_ENABLE_MODULE_ECDSA_S2C}")
+message("  ecdsa-adaptor ....................... ${SECP256K1_ENABLE_MODULE_ECDSA_ADAPTOR}")
+message("  bppp ................................ ${SECP256K1_ENABLE_MODULE_BPPP}")
 message("Parameters:")
 message("  ecmult window size .................. ${SECP256K1_ECMULT_WINDOW_SIZE}")
 message("  ecmult gen precision bits ........... ${SECP256K1_ECMULT_GEN_PREC_BITS}")

README.md

@@ -29,6 +29,43 @@ Building with Autotools
 
 To compile optional modules (such as Schnorr signatures), you need to run `./configure` with additional flags (such as `--enable-module-schnorrsig`). Run `./configure --help` to see the full list of available flags. For experimental modules, you will also need `--enable-experimental` as well as a flag for each individual module, e.g. `--enable-module-musig`.
 
+Building with CMake (experimental)
+----------------------------------
+
+To maintain a pristine source tree, CMake encourages to perform an out-of-source build by using a separate dedicated build tree.
+
+### Building on POSIX systems
+
+    $ mkdir build && cd build
+    $ cmake ..
+    $ cmake --build .
+    $ ctest  # run the test suite
+    $ sudo cmake --build . --target install  # optional
+
+To compile optional modules (such as Schnorr signatures), you need to run `cmake` with additional flags (such as `-DSECP256K1_ENABLE_MODULE_SCHNORRSIG=ON`). Run `cmake .. -LH` to see the full list of available flags.
+
+### Cross compiling
+
+To alleviate issues with cross compiling, preconfigured toolchain files are available in the `cmake` directory.
+For example, to cross compile for Windows:
+
+    $ cmake .. -DCMAKE_TOOLCHAIN_FILE=../cmake/x86_64-w64-mingw32.toolchain.cmake
+
+To cross compile for Android with [NDK](https://developer.android.com/ndk/guides/cmake) (using NDK's toolchain file, and assuming the `ANDROID_NDK_ROOT` environment variable has been set):
+
+    $ cmake .. -DCMAKE_TOOLCHAIN_FILE="${ANDROID_NDK_ROOT}/build/cmake/android.toolchain.cmake" -DANDROID_ABI=arm64-v8a -DANDROID_PLATFORM=28
+
+### Building on Windows
+
+To build on Windows with Visual Studio, a proper [generator](https://cmake.org/cmake/help/latest/manual/cmake-generators.7.html#visual-studio-generators) must be specified for a new build tree.
+
+The following example assumes using of Visual Studio 2022 and CMake v3.21+.
+
+In "Developer Command Prompt for VS 2022":
+
+    >cmake -G "Visual Studio 17 2022" -A x64 -S . -B build
+    >cmake --build build --config RelWithDebInfo
+
 Usage examples
 -----------
 

configure.ac

@@ -454,14 +454,14 @@ if test x"$enable_module_bppp" = x"yes"; then
   enable_module_generator=yes
 fi
 
-if test x"$enable_module_ecdsa_adaptor" = x"yes"; then
-  SECP_CONFIG_DEFINES="$SECP_CONFIG_DEFINES -DENABLE_MODULE_ECDSA_ADAPTOR=1"
-fi
-
 if test x"$enable_module_ecdsa_s2c" = x"yes"; then
   SECP_CONFIG_DEFINES="$SECP_CONFIG_DEFINES -DENABLE_MODULE_ECDSA_S2C=1"
 fi
 
+if test x"$enable_module_ecdsa_adaptor" = x"yes"; then
+  SECP_CONFIG_DEFINES="$SECP_CONFIG_DEFINES -DENABLE_MODULE_ECDSA_ADAPTOR=1"
+fi
+
 if test x"$enable_module_musig" = x"yes"; then
   if test x"$enable_module_schnorrsig" = x"no"; then
     AC_MSG_ERROR([Module dependency error: You have disabled the schnorrsig module explicitly, but it is required by the musig module.])
@@ -498,6 +498,7 @@ if test x"$enable_module_generator" = x"yes"; then
   SECP_CONFIG_DEFINES="$SECP_CONFIG_DEFINES -DENABLE_MODULE_GENERATOR=1"
 fi
 
+
 if test x"$enable_module_ellswift" = x"yes"; then
   SECP_CONFIG_DEFINES="$SECP_CONFIG_DEFINES -DENABLE_MODULE_ELLSWIFT=1"
 fi

src/CMakeLists.txt

@@ -120,6 +120,31 @@ if(SECP256K1_INSTALL)
     "${PROJECT_SOURCE_DIR}/include/secp256k1.h"
     "${PROJECT_SOURCE_DIR}/include/secp256k1_preallocated.h"
   )
+  if(SECP256K1_ENABLE_MODULE_BPPP)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_bppp.h")
+  endif()
+  if(SECP256K1_ENABLE_MODULE_ECDSA_S2C)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_ecdsa_s2c.h")
+  endif()
+  if(SECP256K1_ENABLE_MODULE_ECDSA_ADAPTOR)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_ecdsa_adaptor.h")
+  endif()
+  if(SECP256K1_ENABLE_MODULE_MUSIG)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_musig.h")
+  endif()
+  if(SECP256K1_ENABLE_MODULE_WHITELIST)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_whitelist.h")
+  endif()
+  if(SECP256K1_ENABLE_MODULE_SURJECTIONPROOF)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_surjectionproof.h")
+  endif()
+  if(SECP256K1_ENABLE_MODULE_RANGEPROOF)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_rangeproof.h")
+  endif()
+  if(SECP256K1_ENABLE_MODULE_GENERATOR)
+    list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_generator.h")
+  endif()
+
   if(SECP256K1_ENABLE_MODULE_ECDH)
     list(APPEND ${PROJECT_NAME}_headers "${PROJECT_SOURCE_DIR}/include/secp256k1_ecdh.h")
   endif()